54Mbps Access Point / Bridge-IWE3302-Ag -- InterEpoch Technology Inc.

• Overview

• Powerline Adapter

• IPTV & Surveillance

IWT3200 Series

• Injector

IWE500-INJ Series

IWE3302-Ag 54Mbps Access Point / Bridge

• Special Features

The IWE3302-Ag wireless Access Point, based on IEEE 802.11b, IEEE 802.11g Technology. It is fully compliant with any Wi-Fi certified wireless LAN client and provides anywhere, anytime wireless connectivity for mobile users who want to share files, send emails or access the Internet.

IWE3302-Ag Series provides standard WDS (Wireless Distribution System) bridge functionality joining LAN segments that may be geographically separated (e.g., in two buildings, or in campus) to a complete network. Up to 6 WDS bridge links work in AP function simultaneously, enabling LAN segments to be flexibly connected to mirror any network topology which a traditional wired network can achieve. The bundled Antenna Alignment Utility provides the at-a-glance way to easily assist the antenna deployment through the friendly Windows-based user interface!

It can authenticate and authorize wireless users in organization, enterprises, or public areas by the IEEE 802.1x standard. It communicates with a backend RADIUS (Remote Authentication User Dial In Service) server to see if a wireless user is allowed to access the wireless network. Supports total security solution including WEP, WPA & WPA2 - Personal & Enterprise, WDS with WPA, WPA2-PSK(TKIP/AES). It also supports VLAN protocol to comply with IEEE 802.1Q so that the multiple SSID can be applied to isolate user’s traffic to separate different groups.

The optional POE function allows the power feeding by Ethernet cable to eliminate the additional power line requirement in special install environment. With the sleek and intuitive Web-based user interface, the IWE3302-Ag can be easily managed and satisfied by system integrators’ various requirements.

Features
Specification
Application
Ordering Information
Accessories

• IEEE 802.11b/g
     o 802.11b/g 54Mbps Access Point
     o 64/128 bit WEP
     o Enabling/disabling SSID broadcasts
     o MAC-address-based access control
     o WPA, WPA2 - Personal and Enterprise
     o WDS with WPA, WPA2-PSK(TKIP/AES)
     o AP Client with WEP, WPA, WPA2
     o EAP-MD5 / EAP-TLS / EAP-TTLS and PEAP support
     o Multiple SSID support
     o 802.1Q VLAN support
     o WDS for 6 wireless bridge link
     o Antenna Alignment Utility
     o Transmit power control
     o Wireless client isolation
     o AP Load-balancing
     o Link Integrity
     o Association control
     o Wireless client status monitoring
• DHCP Server
     o Static DHCP mappings
     o Showing current DHCP mappings
• Packet Filters
     o Ethernet type filters
     o IP protocol filters
     o TCP/UDP port filters
• Firmware Upgrade
     o TFTP-based
     o HTTP-based
• Configuration Tools
     o Configuration backup/restore
     o Configuration reset
• Management
     o Web-based management UI
     o UPnP
     o SNMP
     o Local system log
• Optional output power
    o 100mw/200mW/500mW/1W
    o Power over Ethernet (Optional)
    o Hardware Watchdog Timer
    o Periodical restart

Top of page

Ethernet	IEEE802.3u 10/100BaseTX Ethernet (RJ-45) * 2
Antennal	One 2.4GHz rubber R-SMA detachable antenna
Frequency	2.4-2.4835 GHz, Direct Sequence Spread Spectrum (DSSS)
Data Rate	CCK@11/5.5Mbps, DQPSK@2Mbps and DBSK@1Mbps
Channel	USA: 1-11 (FCC) Canada: 1-11 (IC) Europe: 1-13 (ETSI), Japan: 1-14
Transmit Power	2.4 GHz swivel-type monopole antenna
Receiver Sensitivity	802.11b 8% PER@ 1Mbps<=-91dBm, 8% PER@2Mbps<=-88dBm 8% PER@5.5Mbps<=-85dBm, 8% PER@11Mbps<=-83dBm 802.11g 10% PER@ 6Mbps<=-88dBm, 10% PER@9Mbps<=-87dBm 10% PER@12Mbps<=-84dBm, 10% PER@18Mbps<=-82dBm 10% PER@24Mbps<=-79dBm, 10% PER@36Mbps<=-75dBm 10% PER@48Mbps<=-69dBm, 10% PER@54Mbps<=-68dBm
Dimensions	175mm (L) x 140mm (W) x 40mm (H)
LEDs	Power, LAN Link/ACT, 2*RF Link/ACT, System alive
Operating Voltage	DC +5V

	Top of page