| |
BZP100-RP is an Outdoor Unit for Power-over-Ethernet Repeater providing a 10/100Mbps
Ethernet connection for 100m distance and extend Ethernet connectivity another 100m with
power over Ethernet capability. It forwards both Ethernet and PoE for another 330ft (100m)
using an innovative power-processing scheme and multiple units can be deployed in series for
even longer distances, with no degradation in network speed or latency. BZP100-RP itself is
powered by an Ethernet PoE switch (or PoE injector) and so requires no separate power
connection in the middle of the cable, making it extremely easy to connect and power IP
cameras two or three times further than previously possible without going to fiber or installing
mid-span power sources.
In the simplest application, a BZP100-RP allows an IP camera to be located 200-300 meters
away from a POE switch. The switch delivers POE power over the first 100 meters of Cat5
cable to the BZP100-RP, and the BZP100-RP restores the Ethernet signal and forwards
remaining POE power to the camera. The BZP100-RP requires no local power supply, and the
BZP100-RP presents no restriction to the camera network connection. Typically, the POE
switch would be confined to a centrally located equipment room, and would connect to several
IP cameras distributed about the site. With BZP100-RP, each camera may have its own
dedicated connection to the switch, and power cable installation to remote switches or
cameras is not required.
|
|
