| |
BZP100-RP2 is a 2-poprt Power-over-Ethernet (PoE) Repeater providing a 100/100Mbps
Ethernet transmission for 100m distance and with 2 Ethernet switch ports extending individually
another 100m with power over Ethernet capability. It forwards both Ethernet and PoE for
another 330ft (100m) using an innovative power-processing scheme and multiple units can be
deployed in series for even longer distances, with no degradation in network speed or latency.
BZP100-RP2 itself is powered by an Ethernet PoE switch (or PoE injector) and so requires no
separate power connection in the middle of the cable, making it extremely easy to connect and
power IP cameras two or three times further than previously possible without going to fiber or
installing midspan power sources
In the simplest application, a BZP100-RP2 allows to connect two PoE Devices (PDs) located
200 meters away from the POE switch. The switch delivers PoE power over the first 100 meters
of Cat5 cable to the BZP100-RP2, and the BZP100-RP2 restores the Ethernet signal and
forwards remaining POE power to the PDs 100m away. The BZP100-RP2 requires no local
power supply, and the BZP100-RP2 presents no restriction to the Ethernet network connection.
Typically, the PoE switch would be confined to a centrally located equipment room, and would
connect to several PDs distributed about the site. With BZP100-RP2, each PD may have its
own dedicated connection to the switch, and power cable installation to remote switches would
not be required.
|
|
