| |
|
|
| |
|
| |
IWE1700-Aa
802.11a/b/g Rugged Outdoor Long-range
Dual-Band AP/Bridge |
|
| |
|
|
|
| |
|
• Special Features
|
|
| |
|
|
|
| |
Unique software feature:
● SNMP V1, V2
● Automatic software reboot
● Wireless Bandwidth Management
● Wireless & wire client isolation (One AP)
● Wireless & wire client isolation (All APs in same subnet)
● Wireless & wire client isolation (Only to Gateway)
● AP load-balance
● Link Integrity
● Association Control
Designed for outdoor long-range bridging
IWE1700-Aa is a 802.11a/b/g outdoor AP/Bridge. It is designed
with high output power up to a 300mW, b 630mW each.
With die-cast weather proof housing and 100% IP68 certified, the
IWE1700-Aa can work under all rough weather conditions. The
dual a/b/g radios design enables it to be configured into bridgings
through 5Ghz band and AP through 2.4Ghz for clients linking. So
it’s an ideal solution for outdoor long-range AP/Bridging such as hotel, resort, campus, community and other publicarea. Price is more cost effective than ever before, dramatically
lowering your infrastructure costs and increasing your return on
investment.
Wireless AP & Bridge
IWE1700-Aa can be configured into AP mode or Bridge mode. Under AP
mode it can be linked with any b/g or a/b/g wireless LAN client and provides
anywhere, anytime wireless connectivity for mobile users. Under bridge
mode it supports PtP (Point to Point)/ PtMP (Point-to-Multipoint) for distant
locations. The standard WDS (Wireless Distribution System) technology
provides up to 6 static point-to-point bridging links. The AP client
Technology automatically establishes dynamic bridging inks with APs from
any vendor. The AP client technology is very suitable for networks that
needs link backup or point-to-multipoint bridging applications.
Secure authentication based on
industry standard
The IWE1700-Aa can authenticate and authorize
wireless users in organizations, enterprises, or
public areas by the IEEE 802.1x standard. It
communicates with a backend
RADIUS (Remote Authentication User Dial In
Service) server to see if a wireless user is allowed
to access the wireless network. Windows XP has
built-in support for IEEE 802.1x.
WEP, WPA/WPA2-personal & enterprise, WDS& AP client security is also supported for better
wireless security.
Client Isolation for all APs or one
Gateway
The high performance and stable
In order to prevent hackers from attacking other
users’ computers in hotspot area, IWE1700-Aa
supports client isolation for all APs in the same
subnet or one Gateway. So the data of users in
hotspot will be more secured.
Wireless Bandwidth Control
IWE1700-Aa provides bandwidth control feature
for WISP to control the max. bandwidth of each
user. Therefore, WISP operators can offer
different level of connection speed for different
subscription fees.
Easy Installation and management
Through web-based browser of IWE1700-Aa,
users can follow the step-by-step installation
instructions to configure it quickly. In addition, it is
easy for administrators to set up through
web-based management or SNMP v1, v2,
802.1x and 802.1d MIBs. It is UPNP-enabled and
supports remote firmware upgrades via TFTP or
HTTP file-base upload. |
|
| |
- Features
- Specification
- Application
- Ordering Information
- Accessories
| |
• Hardware
o All weather-proof housing, 100% IP68 certified
o Small and light weight
o Built-in heater (Only IP68)
o High transmit power
o Longer distance with Booster
(Option)
o High voltage lightening protector (Option)
• Wireless
o IEEE802.11b/g compliant
o WDS - static bridging
o AP client - dynamic bridging
- AP browsing with signal strength
- Preferred ESSID/BSSID selection
o Transmit power control
o Associated wireless clients status
o Data rate settings
o Support WMM
o Support Mutiple SSID
• Public hotspots
o Link integrity
o Wireless client isolation
o AP load balancing
o Association control
• Networking
o DHCP client & server
o Current DHCP mapping table
o Packet filtering (Ethernet/IP/TCP/UDP/Port)
o 802.1d support
• Security
o 64/128-bits WEP
o WPA, WPA2 - Personal, Enterprise
o WDS with WEP
o AP Client with WEP
o Disabling SSID broadcasts
o MAC-address-based access control
o VPN passthrough
• Management
o Various set of tools for remote management:
Web-based, Windows-based and UPnP
o SNMP v1 & v2
o SNMP traps: Standard and private traps
o MIB II, IEEE 802.11 IEEE 802.1d,
IEEE 802.1x, and private enterprise MIB
o Local web-based(Syslog serve)BSD remote syslog
o Remote log by SNMP trap
o Firmware upgrade via HTTP
o Configuration backup & restore
o Hardware watchdog timer
Top of page
|
| |
| Ethernet |
IEEE802.3u 10/100BaseTX Ethernet (Waterproof Mini Din)
with Power-over-Ethernet |
| Frequency Range |
802.11a Unlicensed National Information Infrastructure (U-NII) frequency band, 5.15~5.85 GHz (subject to local regulations)
802.11b/g ISM band 2.400~2.4835 GHz (subject to local regulations) |
| Modulation |
802.11a/g OFDM
802.11b CCK (11/5.5 Mbps), DQPSK (2 Mbps), DBPSK (1 Mbps) |
| Operating Channels |
802.11a USA and Canada -13, Europe - up to 19 (Subject to CountryRegulations), Japan -4
802.11b/g USA and Canada -3, Europe -3, Japan -3 |
| Antenna Connector |
N-Type Jack*1 |
| Receiver Sensitivity |
802.11a/g Normal Temp Range (typical)
-94dBm@6Mbps, 10-5 BER, -93dBm@9Mbps, 10-5 BER
-86dBm@24Mbps, 10-5 BER, -83dBm@36Mbps, 10-5 BER
-77dBm@48Mbps, 10-5 BER, -74dBm@54Mbps, 10-5 BER
802.11b Typ. -92dBm @ 11Mbps, typical
Typ. -95dBm @ 5.5Mbps, typical
Typ. -96dBm @ 2Mbps, typical
Typ. -97dBm @ 1Mbps, typical |
| Transmit Power |
802.11 a 25dBm Max@6Mbps, 20dBm Max@54Mbps
802.11 b/g 28dBm Max@6Mbps, 23dBm Max@54Mbps |
| Physical Dimensions |
234mm (L) × 170mm (W) × 63mm (H) |
| Temperature |
Operating temperature: -20-70oC
Storage temperature: -30-80oC |
| Humidity |
5%-95% non-condensing in storage |
| Diagnostic LEDs |
Power, LAN Link/ACT, RF Link/ACT, System Alive |
| Emissions |
FCC Part 15 Class B & CE |
| Power over Ethernet |
Input 48V DC/1A |
| |
Top of page
|
|
|
| |
IWE1700-Aa28a
IEEE 802.11a/b/g
AP/Bridge, w/POE, b/g 500~600mW,a
250~300mW,IP68
IWE1700-Aa25a
IEEE 802.11a/b/g
AP/Bridge, b/g 500~600mW,a
250~300mW,IP65
Top of page
|
| |
Standard |
|
| |
| |
|
|
|
 |
 |
 |
 |
1.2M Ethernet Cable |
Wall-Mounting Kit |
Wall Mount #1 |
Wall Mount #2 |
| |
|
|
|
 |
|
|
|
User’s Guide CD |
|
|
|
| |
|
|
|
|
|
| |
Option |
|
| |
|
|
|
| |
|
|
|
|
|
|
