| |
|
|
| |
|
| |
IWE1700-Ta
802.11a/b/g Rugged Outdoor Long-range
Dual-Radio Dual-Band AP/Repeater |
|
| |
|
|
|
| |
|
• Special
Features
|
|
| |
|
|
|
| |
Unique software feature:
● SNMP V1, V2
● Automatic software reboot
● Wireless Bandwidth Management
● Wireless & wire client isolation (One AP)
● Wireless & wire client isolation (All APs in same subnet)
● Wireless & wire client isolation (Only to Gateway)
● AP load-balance
● Link Integrity
● Association Control
Designed for outdoor long-range bridging
IWE1700-Ta is a 802.11a/b/g outdoor dual-radio AP/Repeater.
It is designed with 2 radios output power up to a 300mW,b 630mW each. With die-cast weather proof housing and 100%
IP68 certified, the IWE1700-Ta can work under all rough weather
conditions. The dual a/b/g radios design enables it to be configured
into two bridgings through 5Ghz band to prevent 2.4Ghz
interference. So it’s an ideal solution for outdoor long-range
AP/Bridging such as hotel, resort, campus, community,metropolitan or rural area networking. Price is more cost
effective than ever before, dramatically lowering your infrastructure
costs and increasing your return on investment.
Two-RF-interfaces-in-one-box solution
The IWE1700-Ta is a 802.11a/b/g-based multifunction device that has two
independently configurable RF interfaces. Each RF interface can be
configured either as an AP (Access Point) interface, a static bridge interface
or a dynamic bridge interface. An AP interface enables easy wireless
access for mobile users in public areas. A static bridge interface establishes
a point-to-point wireless connection with another bridge through the
Wireless Distribution System (WDS) technology. A dynamic bridge interface
automatically establishes a point-to-point wireless connection with APs from
any vendors through the AP client technology.
Secure authentication based on
industry standard
The IWE1700-Ta can authenticate and authorize
wireless users in organizations, enterprises, or
public areas by the IEEE 802.1x standard. It
communicates with a backend RADIUS (Remote
Authentication User Dial In Service) server to see
if a wireless user is allowed to access the wireless
network. Windows XP has built-in support for
IEEE 802.1x WEP, WPA/WPA2-personal &
enterprise, WDS & AP client security is also
supported for better wireless security.
Client Isolation for all APs or one
Gateway
In order to prevent wireless hackers from attackin
other wireless users’ computers in hotspot area,
IWE1700-Ta supports or one gateway client
isolation for all APs in the same subnet. So the
data of users in hotspot will be more secured.
Wireless Bandwidth Control
IWE1700-Ta provides bandwidth control feature
for WISP to control the max. bandwidth of each
user. Therefore, WISP operators can offer
different level of connection speed for different
subscription fees.
Easy Installation and management
Through web-based browser of IWE1700-Ta,
users can follow the step-by-step installation
instructions to configure it quickly. In addition, it is
easy for administrators to set up through
web-based management or SNMP v1, v2c,
802.1x and 802.1d MIBs. It is UPNP-enabled and
supports remote firmware upgrades via TFTP or
HTTP file-base upload.
|
|
| |
- Features
- Specification
- Application
- Ordering
Information
- Accessories
| |
• Hardware
o All weather-proof housing,
100% IP68 certified
o Built-in heater
o High transmit power
o Longer distance with Booster
(Option)
o High voltage lightening protector
(Option)
• Wireless
o Two IEEE802.11b/g compliant
o WDS - static bridging
o AP client - dynamic bridging
- AP browsing with signal strength
- Preferred ESSID/BSSID selection
o Transmit power control
o Associated wireless clients
status
o Data rate settings
o Support WMM
o Support Mutiple SSID
• Public hotspots
o Link integrity
o Wireless client isolation
o AP load balancing
o Association control
• Networking
o DHCP client & server
o Current DHCP mapping table
o Packet filtering (Ethernet/TCP/UDP/Port)
o 802.1d support
• Security
o 64/128-bits WEP
o WPA, WPA2 - Personal, Enterprise
o WDS with WEP, WPA/WPA2 -
PSK(TKIP/AES)
o EAP-MD5, EAP-TLS, EAP-TTLS
and PEAP support
o Disabling SSID broadcasts
o MAC-address-based access
control
o VPN passthrough
• Management
o Various set of tools for
remote management:
Web-based,
Windows-based and UPnP
o SNMP v1 & v2
o SNMP traps: Standard and
private traps
o MIB II, IEEE 802.11 IEEE
802.1d,
IEEE
802.1x, and private enterprise
MIB
o Local web-based(Syslog serve)BSD
remote syslog
o WDS link quality indicator
o Firmware upgrade via HTTP
and TFTP
o Configuration backup & restore
o Hardware watchdog timer
Top
of page
|
| |
| Ethernet |
IEEE802.3u
10/100 Base TX Ethernet
(Waterproof Mini Din)
with Power-over-Ethernet |
| Antenna
Connector |
N-Type
Jack*2 |
| Frequency
Band |
802.11a
-Unlicensed National Information
Infrastructure (U-NII)
frequency band, 5.15~5.85
GHz (subject to local regulations)
802.11b/g - ISM band 2.400~2.4835
GHz (subject to local regulations) |
| Modulation |
802.11a/g
OFDM
802.11b CCK (11/5.5 Mbps),
DQPSK (2 Mbps), DBPSK (1
Mbps) |
| Number
of Non-Overlapping Channel |
802.11a
USA and Canada -13, Europe
- up to 19 (Subject to
Country
Regulations), Japan -4
802.11b/g USA and Canada
-3, Europe -3, Japan -3 |
| Transmit
Power |
802.11
a 22dBm Max@6Mbps, 17dBm
Max@54Mbps or
802.11 a 25dBm Max@6Mbps, 13dBm Max@54Mbps
802.11 b/g 25dBm Max@6Mbps, 23dBm Max@54Mbps or
802.11 b/g 28dBm Max@6Mbps, 23dBm Max@54Mbps |
| Receiver
Sensitivity |
802.11a/g
Normal Temp Range (typical)
-94dBm@6Mbps, 10-5 BER,
-93dBm@9Mbps, 10-5 BER
-91dBm@12Mbps, 10-5 BER,
-90dBm@18Mbps, 10-5 BER
-86dBm@24Mbps, 10-5 BER,
-83dBm@36Mbps, 10-5 BER
-77dBm@48Mbps, 10-5 BER,
-74dBm@54Mbps, 10-5 BER
802.11b Typ. -92dBm @ 11Mbps,
typical , Typ. -95dBm @ 5.5Mbps,
typical
Typ. -96dBm @ 2Mbps, typical
, Typ. -97dBm @ 1Mbps, typical |
| Physical
Dimensions |
234mm
(L) × 170mm (W) × 63mm
(H) |
| Temperature |
Operating
temperature: -20-70oC
Storage temperature: -30-80oC |
| Humidity |
5%-95%
non-condensing in storage |
| Weather-proof |
IP
68 |
| Emissions |
FCC
Part 15 Class B & CE |
| |
|
| |
Top
of page
|
|
|
| |
| IWE1700Ta
(802.11b/g Outdoor AP/Bridge/Repeater,
w/ PoE, w/ RoHS) |
w/
IP68 approval (with
built-in heater)
IWE1700-Ta
18a
802.11a/b/g
Outdoor Dual-Radio Repeater
w/POE, b/g 250~300mW, a
125~150mW
IWE1700-Ta
28a
802.11a/b/g
Outdoor Dual-Radio Repeater
w/POE, b/g 250~300mW,
a 125~150mW |
| |
|
IWE1700-Ta
15a
802.11a/b/g Outdoor
Dual-Radio Repeater w/POE,
b/g 500~600mW, a 250~300mW
IWE1700-Ta
25a
802.11a/b/g
Outdoor Dual-Radio Repeater
w/POE, b/g 500~600mW,
a 250~300mW |
|
| |
|
Top
of page
|
| |
Standard |
|
| |
| |
|
|
|
 |
 |
 |
 |
1.2M
Ethernet Cable |
Wall-Mounting
Kit |
Wall
Mount #1 |
Wall
Mount #2 |
| |
|
|
|
 |
|
|
|
User’s
Guide CD |
|
|
|
| |
|
|
|
|
|
| |
Option |
|
| |
|
|
|
| |
|
|
|
|
|
|
