Home News About Solutions Product Support Inquiry Contacts    
         
   
 

• Overview
 
   
  IWE3300-Ag High Power Wireless Access Point  
       
 
• Special Features

Hight Power Power over Ethernet AP Client Wireless Distribution System
Wi-Fi Protected Access Wi-Fi Protected Access Wireless Encryption Protoco Hardware WatchDog  
Product Datasheet Product Specification  

 
     
   

Unique feature:

● Output power up to 500mW/1W Average Power
● MSSID & VLAN ID TAG support
● Wireless Communication for Public Hotspots, Enterprises
    and Point-to-Point Bridging Applications

InterEpoch's IWE3300-Ag Series is based on the IEEE 802.11g standard to provide both Access point and Bridge features at a cost effective way for mobile users to connect to their corporate Ethernet-based LANs.

The IWE3300-Ag Series provides standard WDS (Wireless Distribution System) bridge functionality joining LAN segments that are physcially separated (e.g., in two buildings, or in campus) to a complete network. Up to 6 WDS bridge links work with AP function simultaneously, allowing LAN segments to be flexibly connected to mirror any network topology which a traditional wired network can achieve.

For environments or locations where power is difficult to get, IWE3300-Ag Series offers an optional POE function that complies with the IEEE802.3af standard thereby supplying sufficient power input via the Ethernet cable. InterEpoch has the IWE500-INJ POE Injector available for such POE applications.

The flexible R-SMA detachable antennas can be replaced with high-gain directional/omni-directional antennas for different purposes. All in all, the IWE3300-Ag Hotspot AP Bridge Series is the best solution for robust and secure wireless applications of SOHO, SME, Enterprise, HotSpot, ISP and Telco operators.

    
 
  • Features
  • Specification
  • Application
  • Ordering Information
  • Accessories
 

• Wireless
     o IEEE802.11b/g compliant
     o High transmit power up to 200mW
     o WDS - static bridging
     o AP client - dynamic bridging
           - AP browsing with signal strength
           - Preferred ESSID/BSSID selection
     o Transmit power control
     o Associated wireless clients status
     o Data rate settings
• Public hotspots
     o Link integrity
     o Wireless client isolation
     o AP load balancing
     o Association control
• Networking
     o DHCP client & server
     o Current DHCP mapping table
     o Packet filtering (Ethernet/TCP/UDP/Port)
• Security
     o 64/128-bits WEP
     o WPA,WPA2 - Personal, Enterprise
     o WDS with WPA, WPA2-PSK(TKIP/AES)
     o IEEE802.1x/EAP-MD5, EAP-TLS, EAP-TTLS and PEAP support
     o MAC-address-based access control
     o AP Client with WEP, WPA, WPA2 (optional)
     o Multiple SSID support (optional)
     o 802.1Q VLAN support (optional)
     o Disabling SSID broadcasts
     o VPN passthrough
• Management
     o Web-based/SNMP:
        Web-based, and UPnP
     o SNMP v1 & v2
     o SNMP traps: Standard and private traps
     o MIB II, IEEE 802.11 IEEE 802.1d,
        IEEE 802.1x, and private enterprise MIB
     o System log
     o WDS link quality indicator
     o Firmware upgrade via HTTP and TFTP
     o Configuration backup & restore
     o Hardware watchdog timer

Top of page
 
Standards IEEE802.11b for Wireless LAN
IEEE802.3u 10/100BaseTX for Ethernet LAN
Frequency Range 2.4-2.4835 GHz, Direct Sequence Spread Spectrum (DSSS)
Operating Channels USA: 1-11 (FCC)
Canada: 1-11 (IC)
Europe: 1-13 (ETSI)
Japan: 1-14
Antenna 2dBi diversity antennas depending on model variations
Security 64-bit and 128-bit WEP encryption, IEEE 802.1x/RADIUS (Advanced)
Transmit Power 802.11b : 26dBm typical
802.11g : 23dBm typical
Receiver Sensitivity Better than -85dBm
Line-of-Sight Range 1200ft (400meters) with outdoor line of sight
Client OS Support Windows 95/98/2000/ME/NT/XP, Unix and Macintosh
Supported Protocols NAT, PAP/CHAP, PPPoE, PPP, HTTP, DHCP, TCP/IP, RADIUS, DNS,
NetBIOS, AppleTalk, and IPX/SPX
Operating Voltage DC +5V or Power over Ethernet supported power (optional)
Operational Modes AP/Bridge, AP Client
Physical Dimensions 175mm (L) × 145mm (W) × 50mm (H)
Temperature Operating temperature: 0-40oC
Storage temperature: -20-70oC
Humidity 5%-95% non-condensing in storage
Diagnostic LEDs Power, LAN Link/ACT, RF Link/ACT, System Alive
Certification FCC Part 15 Class B & CE
   
 

Top of page

 

 

Top of page
 
  • IWE3300-Ag1pa
    • IEEE 802.11g AP w/POE, 100mW, Advanced S/W
  • IWE3300-Ag2pa
    • IEEE 802.11g AP w/POE, 100mW, Advanced S/W
  • IWE500-INJ
    • 1-port PoE Injector

    Top of page
     
    Standard
    		 
     
           
    Antenna
    DC Adapter
    Screws
    User’s Guide CD
           
           
           
           
    		 
     
    Option
    		 
     
           
    None