Home News About Solutions Product Support Inquiry Contacts    
         
   
 

• Overview
 
   
  IWE3300-Tg 802.11b/g High-Power Dual-Radio AP/Repeater  
       
 
• Special Features

Power over Ethernet AP Wireless Distribution System Repeater Wi-Fi Protected Access
Wireless Encryption Protoco Hardware WatchDog      
Product Datasheet    

 
     
   

Unique software feature:

● SNMP V1, V2
● Automatic software reboot
● Wireless Bandwidth Management
● Wireless & wire client isolation (One AP)
● Wireless & wire client isolation (All APs in same subnet)
● Link Integrity
● Association Control

Two-RF-interfaces-in-one-box solution
The IWE3300-Tg is an IEEE802.11g-based multifunction device that has two independently configurable RF interfaces. Each RF interface can be configured either as an AP (Access Point) interface, a static bridge interface or a dynamic bridge interface. An AP interface enables easy wireless access for mobile users in public areas. A static bridge interface establishes a point-to-point wireless connection with another bridge through the Wireless Distribution System (WDS) tech-nology. A dynamic bridge intereface automatically establishes a point-to-point wireless connection with APs from any vendors through the AP client technology.

Secure authentication based on industry standard
The IWE3300-Tg can authenticate and authorize wireless users in organizations, enterprises, or public areas by the IEEE 802.1x standard. It communicates with a backend RADIUS (Remote Authentication User Dial In Service) server to see if a wireless user is allowed to access the wireless network. Windows XP has built-in support for IEEE 802.1x WEP, WPA/WPA2-personal & enterprise, WDS & AP client security is also supported for better wireless security.

Client Isolation for all APs or one Gateway
In order to prevent wireless hackers from attackin other wireless users’ computers in hotspot area, IWE3300-Tg supports or one gateway client isolation for all APs in the same subnet. So the data of users in hotspot will be more secured.

Easy Installation and management
Through web-based browser of IWE3300-Tg, users can follow the step-by-step installation instructions to configure it quickly. In addition, it is easy for administrators to set up through web-based management or SNMP v1, v2c, 802.1x and 802.1d MIBs. It is UPNP-enabled and supports remote firmware upgrades via TFTP or HTTP file-base upload.

    
 
  • Features
  • Specification
  • Application
  • Ordering Information
  • Accessories
 

• Wireless
     o Two IEEE802.11b/g compliant
     o 4 operational modes: Bridge repeater, Static
        AP repeater, Dynamic AP repeater, Dual AP
     o WDS - static bridging
     o AP client - dynamic bridging
           - AP browsing with signal strength
           - Preferred ESSID/BSSID selection
     o Transmit power control
     o Associated wireless clients status
     o Data rate settings
• Hardware
     o Full speed bridge up to 54 Mbps
     o Lower radio jamming frequency band with
        Up/Down Converter (Option, need license)
• Public hotspots
     o Link integrity
     o Wireless client isolation for AP
     o Wireless client isolation for All APs in same subnet
     o AP load balancing
     o Association control
• Networking
     o DHCP client & server
     o Current DHCP mapping table
     o Packet filtering (Ethernet/TCP/UDP/Port)
• Security
     o 64/128-bits WEP
     o WPA-Personal,Enterprise
     o WDS with WPA-PSK(TKIP/AES)
     o IEEE802.1x/EAP-MD5, EAP-TLS, EAP-TTLS and PEAP support
     o Disabling SSID broadcasts
     o MAC-address-based access control
     o VPN passthrough
• Management
     o Web-based management:
        Web-based, Windows-based and UPnP
     o System log
     o WDS link quality indicator
     o Firmware upgrade via HTTP and TFTP
     o Configuration backup & restore
     o Hardware watchdog timer

Top of page
 
Ethernet IEEE802.3u 10/100 Base TX Ethernet (Waterproof Mini Din)
with Power-over-Ethernet
Antenna Connector R-SMA Jack*2
Frequency 2.4-2.4835 GHz, Direct Sequence Spread Spectrum (DSSS)
Data Rate OFDM@54/48/36/24/18/12/9/6Mbps, CCK@11/5.5Mbps, DQPSK@2Mbps and DBSK@1Mbps
Channel USA: 1-11 (FCC)
Canada: 1-11 (IC)
Europe: 1-13 (ETSI)
France: 10-13,
Japan: 1-14
Transmit Power 802.11b 25±1dBm, 802.11g 22±1dBm
Receiver Sensitivity 802.11b -
8% FER@ 1Mbps≤ -97dBm, 8% FER@2Mbps≤ -94dBm
8% FER@5.5Mbps≤ -91dBm, 8% FER@11Mbps≤ -89dBm
802.11g -
10% PER@ 6Mbps≤ -94dBm, 10% PER@9Mbps≤ -93dBm
10% PER@12Mbps≤ -90dBm, 10% PER@18Mbps≤ -88dBm
10% PER@24Mbps≤ -85dBm, 10% PER@36Mbps≤ -81dBm
10% PER@48Mbps≤ -75dBm, 10% PER@54Mbps≤ -74dBm
Dimensions 220mm (L) x 1142mm (W) x 40mm (H)
LEDs Power, LAN Link/ACT, RF Link/ACT, System alive
Temperature Operating temperature: 0-55oC
Storage temperature: -20-70oC
Humidity 5%-95% non-condensing in storage
Diagnostic LEDs Power, LAN Link/ACT, RF Link/ACT, System Alive
Power over Ethernet Input 48V DC/1A
   
 

Top of page

 

Top of page
 
  • IWE3300-Tg3pa

    • IEEE 802.11b/g Indoor Dual-Radio Repeater, w/avg.b 300mW, g 150mW,
    peak b 600mW, g 300mW, PoE MSSID

    Top of page
     
    Standard
    		 
     
           
    Antenna
    Repeater Antenna
    DC Adapter
    Screws
           
         
    User’s Guide CD
    		      
           
    		 
     
    Option
    		 
     
           
    None