IWE1200A / IWE1200A-1 (802.11b Broadband Switch Router) -- InterEpoch Technology Inc.

简体中文


	• Overview
	• Technical Support
	• Phase-Out Product
	• FAQ

IWE1200A / IWE1200A-1 (802.11b Broadband Switch Router)

Upgrades

NOTE:
There are several hardware variations for IWE1200A/IWE1200A-1. The firmware version number designates the hardware variations and firmware features. The format of the firmware version number is MajorHw.MajorFw.RFType.BuildNum, where

MajorHw:   Major Hardware, major hardware platform variation

MajorFw:   Major Firmware, major firmware feature changes

RFType:     RF Type, type of RF module used

BuildNum: Build Number, used as a tag for a firmware build

Check the hardware variation and RF module type of your device before downloading a correct version of firmware for upgrade.

For G1

Firmware	User's Guide	Print Client	Utilities	Wi-Link Network Manager	Release Notes
1.4.3.3072	2.7		1.1.0.6	1.2.7.395 (.msi only)	1.4.3.3072
1.3.1.2830					1.3.1.2830
1.3.1.2800	1.26		1.0.1	1.1.0.344 (.msi only) 1.1.0.344 (full package)	1.3.1.2800
1.1.1.1700 ***					1.1.1.1700
1.1.1.1633	1.07	1.0 (.msi only) 1.0 (full package)	1.0		1.1.1.1633

*** If the firmware version of your IWE1200A is earlier than 1.1.1.1700, you cannot upgrade to 1.3.1.2800 and later directly. Please upgrade to 1.1.1.1700 first and then upgrade to 1.3.1.2800. Then, you can upgrade to 1.3.1.2830 or later.

For G2

FirmwareUser's Guide Print Client Utilities Wi-Link Network Manager Release Notes

2.6.3.4132
2.12 1.4.0.0

1.4.8.51

2.6.3.4132

2.5.3.3219
2.10

1.3.0.7

1.3.7.7

2.5.3.3219

2.4.3.2982
2.7 1.0 (.msi only)

1.1.0.6

1.2.7.395 (.msi only)

2.4.3.2982

For G3

FirmwareUser's Guide Print ClientUtilities Wi-Link Network Manager Release Notes

3.6.3.4132 2.12
1.0 (.msi only)

1.4.0.0

1.4.8.51
3.6.3.4132

WARNING:

Use an incorrect version of firmware for your device will corrupt the flash memory of the device and make it unworkable. Therefore, be cautious about the model, hardware generation and variation of your device by carefully checking your current firmware version first.

Get a computer that will be used as a TFTP server and as a managing computer to trigger the upgrade process.
Connect the computer and the LAN/Config Ethernet port of IWE1200A AP with a crossover Ethernet cable. (We have included a crossover Ethernet cable in the package for IWE1200A AP).
Configure IP address of the computer so that the AP and the computer are in the same IP subnet.
On the computer, run the TFTP Server utility. And specify the folder in which the firmware files reside.
On the computer, run MS Internet Explorer and click the Upgrade Firmware hyperlink.
Specify the IP address of the computer, which acts as a TFTP server. If you don't know the IP address of the computer, open a Command Prompt, and type IpConfig, then press the Enter key.
Trigger the firmware upgrade process by clicking Upgrade.
Delete the contents of the Web browser cache (temporary Internet files), so that the Web management pages can be shown correctly after the upgrade.

Run MS Internet Explorer on the managing computer and connect to the IWE1100-R.
Within the Web management UI, click the Upgrade Firmware hyperlink and choose HTTP as the firmware management protocol.
Click Browse and then select a correct firmware .bin file. The firmware file path will be shown in the Firmware file name text box.
Click Upgrade to begin the upgrade process.